24
en-us
Personal recipes
Ž
Personal recipes
Personal recipes
You can save up to 50
individual recipes. You can record
a recipe. You can assign these recipes a name so that
you can fall back on them quickly and conveniently if you
need them.
Recording a recipe
It is possible to set up to 5
phases consecutively while
recording at the same time.
1.
Set the function selector to
ž
.
2.
Touch the
i
symbol.
3.
Use the rotary selector to select "Individual recipes"
and press
™
to confirm.
4.
Use the rotary selector to select a free memory
location.
5.
Touch the
g
symbol.
6.
Set the desired temperature with the rotary selector.
7.
The cooking time is recorded.
8.
Recording another phase:
Set the program selection to the required heating
function. Set the required temperature with the rotary
selector. A new phase begins.
9.
Once the appliance has achieved the desired cooking
result, touch the
&
symbol to end the recipe.
10.
Enter the name under "ABC".
Notes
▯
Recording a phase does not begin until the appliance
has reached the set temperature.
▯
Every phase must last at least one minute.
▯
During the first minute you can change the heating
function or the temperature.
Enter the core temperature for a phase:
Insert the core temperature probe in the socket in the
oven interior. Set the heating function and temperature.
Touch the
+
symbol. With the rotary selector, enter the
required temperature and confirm it with
+
.
Programming a recipe
You have the option of programming and saving up to five
phases of preparation.
1.
Set the function selector to
ž
.
2.
Touch the
i
symbol.
3.
Use the rotary selector to select "Individual recipes"
and press
™
to confirm.
4.
Choose a free storage location with the rotary
selector.
5.
Touch the
%
symbol.
6.
Enter the name under "ABC".
7.
Choose the first phase with the
C
symbol.
The heating function and temperature set at the start
are displayed. You can change the heating function
and temperature with the rotary selectors.
8.
Choose the time setting with the
C
symbol.
9.
Set the required cooking time with the rotary selector.
10.
Choose the next phase with the
C
symbol.
- or -
Preparation is complete, end input.
11.
Save with
™
.
- or -
Cancel with
'
and quit the menu.
Enter the core temperature for a phase:
Choose the next phase with the
C
symbol. Set the
heating function and temperature. Touch the
+
symbol.
With the rotary selector, enter the required temperature
and confirm it with
+
.
Note:
For phases for which a core temerature has been
programmed you cannot set a cook time.
)
)
Summary of Contents for BO 451 612
Page 1: ...DJJHQDX Use and care manual BO 450 451 612 Built in oven...
Page 65: ......
Page 66: ......
Page 67: ......
