24
Starting pyrolytic self-cleaning
1
Set the function selector to
S
.
2
The
œ
symbol is displayed. Confirm with
™
.
3
The switch-off time, when pyrolytic self-cleaning will
be finished, is displayed. If required, move the
switch-off time with the rotary selector. Confirm
with
™
.
4
Remove all accessories and coarse soiling from the
oven interior. Confirm with
™
.
5
Press
I
to start. The cleaning time elapses on the
display. If the switch-off time has been shifted, the
time up to the start of pyrolytic self-cleaning
elapses in the display. The lamp in the oven interior
stays off.
A signal sounds after 3 hours. A message appears in
the display. Once the appliance has cooled down, wipe
the remaining ash out of the interior with a moist cloth.
Note:
For your safety, the oven door is locked. When
cooling down, the door lock is released when the
temperature drops below 200°C.
Cleaning accessories with pyrolytic
self-cleaning
Gaggenau baking trays and grill trays are coated with
pyrolysis-proof enamel. To arrive at an optimum cleaning
result, you are nevertheless advised to remove all
accessories from the oven before the pyrolytic cleaning
process. Only this will ensure optimum heat distribution.
If you would like to remove burnt-in residues from your
baking tray or your grill tray with pyrolytic self-cleaning,
it is imperative that you observe the following notes:
Notes
‒
Remove extreme soiling, roast juice and food
remainders before pyrolytic self-cleaning. Food
remainders, grease or roast juice can catch fire
during pyrolytic self-cleaning.
‒
Only ever insert one baking tray or one grill tray in
the lowest shelf in the oven.
‒
Insert the baking tray or the grill tray fully.
‒
The wire rack, rotisserie spit, cast roaster, baking
stone, core temperature probe or other accessories
must not be cleaned by pyrolytic self-cleaning.
3\URO\WLFVHOIFOHDQLQJ
_
