Gaggenau BOP2201.2, User Manual And Installation Instructions

en 

Long-term timer

14

5.

Press  , open the appliance door or set the func-
tion selector to  ⁠.

a

The signal tone stops.

Changing the cooking time

1.

Press  ⁠.

2.

Use   to select the "Cooking time"   function.

3.

Use the rotary selector to change the cooking time.

4.

Press   to start.

Deleting the cooking time

1.

Press  ⁠.

2.

Use   to select the "Cooking time"   function.

3.

Use   to cancel the cooking time.

4.

Use   to return to normal operation.

Cancelling the entire procedure

▶

Turn the function selector to  ⁠.

8.7 Cooking time end

You can move the cooking time end to a later time.
Example: It is 14:00. The dish requires a cooking time
of 40 minutes. You want the meal to be ready at 15:30.
Enter the cooking time of 40 minutes and delay the
cooking-time end until 15:30. The electronics system
calculates the start time. The appliance starts automat-
ically at 14:50 and switches off at 15:30.
Bear in mind that food which spoils easily should not
be left in the appliance for too long.

Delaying the cooking time end

Requirements

¡

The food is in the cooking compartment.

¡

You have set the type of heating, temperature and
cooking time.

1.

Press  ⁠.

2.

Use   to select the "Cooking time end"   function.

3.

Use the rotary selector to set the required cooking
time end.
If   flashes, set the cooking time first.

4.

Press   to start.

a

The appliance switches to standby.

a

The display shows the operating mode, temperat-
ure, cooking time and cooking time end.

a

The appliance starts at the calculated time and auto-
matically switches off once the cooking time has
elapsed.

a

After the cooking time has elapsed,   flashes and a
signal tone sounds.

5.

Press  , open the appliance door or set the func-
tion selector to  ⁠.

a

The signal tone stops.

Changing the cooking time end

1.

Press  ⁠.

2.

Use   to select the "Cooking time end"   function.

3.

Use the rotary selector to set the required cooking-
time end.

4.

Press   to start.

Cancelling the entire procedure

▶

Turn the function selector to  ⁠.

9  Long-term timer

With the appliance in hot air mode, this function keeps
the temperature between 50 °C and 230 °C.
You can keep food warm for up to 74 hours without
having to switch the appliance on or off.
Bear in mind that food which spoils easily should not
be left in the appliance for too long.

9.1 Starting the long-term timer

Requirement:

 The long-term timer is set to "Available"

in the basic settings → 

Page 18

.

1.

Turn the function selector to  ⁠.

2.

Press 

⁠.

a

The display shows the default value 24h at 85 °C.

3.

Press   and use the rotary selector to set the re-
quired cooking time.

4.

Press   and use the rotary selector to set the re-
quired cooking time end.

5.

Press  , use the rotary selector to set the required
switch-off date, and press   to confirm.

6.

Use the rotary selector to set the desired temperat-
ure.

7.

Press   to start.

a

The appliance starts the long-term timer.

a

The display shows 

 and the temperature.

a

The interior lighting and the display lighting are
switched off.

a

The control panel is locked.

a

If you touch the control panel, no signal tone
sounds.

a

Once the time has elapsed, the appliance no longer
heats up and the display goes out.

8.

Turn the function selector to  ⁠.

9.2 Switching off the long-term timer

▶

Turn the function selector to  ⁠.