Gaggenau BOP2201.2, User Manual And Installation Instructions

en 

Accessories

10

4.4 Standby

The appliance switches to standby mode if no function
is set or the childproof lock is activated. The standby
screen appears if you do not implement any settings
for a long time.
Different displays can be shown in standby mode. The
GAGGENAU logo and the time are preset.
In standby mode, the brightness of the control panel is
reduced. The brightness of the display depends on the
vertical viewing angle. You can change the display and
the brightness at any time in the basic settings
→ 

Page 18

.

When "Off" is selected for the standby display in the
basic settings, you must turn the function selector to
exit standby mode.
When the door is open, the interior lighting switches off
after a short time.

4.5 Additional information

Press   to display additional information, e.g. informa-
tion about the type of heating that is set or the current
cooking compartment temperature.
During continuous operation after heating up, slight
temperature fluctuations are normal.
The appliance displays the   symbol for important in-
formation and indicates that an action is required. The
appliance also occasionally displays important informa-

tion about safety and the operating status automatic-
ally. These messages disappear automatically after a
few seconds, or press   to confirm the message.
For messages about Home Connect, the appliance
also displays the Home Connect status in the   sym-
bol. 
→ 

"Home Connect ", Page 16

4.6 Cooling fan

The cooling fan switches on when the appliance is in
operation. Depending on the appliance version, hot air
escapes either over or beneath the door.
After removing your food from the appliance, keep the
door closed until the appliance has cooled down. The
appliance door must not be left half open as this may
damage adjacent kitchen units. The cooling fan contin-
ues running for a certain period of time after the appli-
ance has stopped heating and then it switches itself off
automatically.
Do not cover the ventilation slots. Otherwise, the appli-
ance will overheat.

4.7 Rapid heating

With the "Rapid heating" function, your appliance
reaches the temperature you require particularly
quickly in the "top heat", "bottom heat" and "top + bot-
tom heat" types of heating.
To ensure an even cooking result, do not place your
food in the cooking compartment until "Rapid heating"
is complete and the 

 symbol has gone out.

The "Rapid heating" function is set by default in the ba-
sic settings. In the basic settings → 

Page 18

, you can

select 

 Rapid heating or 

 Heat-up.

4.8 Automatic switch-off

For your protection, the appliance is equipped with an
automatic switch-off function. The appliance switches
off any heating process after 12 hours if the appliance
controls are not used during this time. The display
shows a message.
When programming with the long-term timer, the appli-
ance does not activate the automatic switch-off func-
tion.

5  Accessories

Use original accessories. These have been made espe-
cially for your appliance.

Note: 

Accessories may become deformed if they get

hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.

The accessories supplied may differ depending on the
appliance model.