17
7
The duration of 20:00 minutes appears. Touch
I
to
start calibration.
Calibration begins. The elapsing time is shown on the
display.
Note:
Do not interrupt calibration. Do not turn the
function selector. Do not open the appliance door.
A message appears in the display once calibration has
ended. Touch
™
to confirm and turn the function
selector to
0
.
After a removal
Repeat calibration so that the appliance will
automatically adapt again to the new location.
After resetting to factory settings
After resetting to factory settings in the basic settings
menu the appliance has to be recalibrated.
After a power failure
The appliance saves the calibration settings, even after
a power failure or a disconnection from the mains. It
need not be recalibrated.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Water filter
Water filter
Operation with or without water filter
You can use the appliance with or without a water filter.
It is recommended to install the descaling system
GF 111 700 if the water hardness exceeds 7°dH
(carbonate hardness 5°dH).
Change water filter
Filter cartridges should be replaced regularly.
Replacement cartridges are available from after-sales
service or in the online shop (order
number GF 121 710).
The capacity of the filter cartridge depends on the
frequency of use of the appliance and your regional
water hardness. A message will appear in the display to
remind you when the filter needs to be replaced.
Regardless of the actual amount of water filtered the
filter cartridge needs to be changed after 12 months at
the latest.
1
Set the function selector to
S
. Select "Water filter
change" using the rotary selector.
2
The
œ
symbol is displayed. Confirm with
™
.
3
Change the water filter. Refer to the instructions
included with the filter cartridge. Confirm with
™
.
4
"Select water filter capacity” is shown in the display.
Confirm with
™
.
5
Turn the rotary selector to select the capacity of the
filter cartridge (between 100 - 9000 liters). Confirm
with
™
.
The water filter change is complete. Touch the
™
symbol. The appliance is now ready for operation.
&DOLEUDWLRQ
&$/
&$/
Summary of Contents for BS 470 611
Page 1: ...Gaggenau Use and care manual BS 470 471 611 BS 474 475 611 BS 484 485 611 Combi steam oven...
Page 58: ......
Page 59: ......