22
en
Timer functions
Frying sensor technology for pans/cooking sensor
If you set a cooking time for a cooking zone with
activated frying sensor technology or activated cooking
sensor, the cooking time begins to count down
immediately and not just once the selected temperature
level has been reached.
Changing or deleting the time
Select the hotplate and then touch the
6
symbol.
Change the cooking time using the twist knob or set to
‹‹
to delete it.
When the time has elapsed
The hotplate switches off. A signal sounds,
‹
appears
in the hotplate display and
‹‹
flashes in the timer
display. Touch any symbol or press the twist knob; the
displays go out and the audible signal ceases.
Notes
–
If a cooking time has been programmed for several
hotplates, the cooking time that ends first will
appear in the timer display. The
6
indicator for the
hotplate lights up orange.
–
Select the relevant hotplate to call up the remaining
cooking time for a hotplate. The cooking time will
appear for 10 seconds.
The short-term timer
You can use the short-term timer to set a time of up to
99 minutes.
This works independently from the hotplates and from
other settings. This function does not automatically
switch off a hotplate.
How to activate the function
1
Touch the
Š
symbol;
‹‹
appears in the timer
display.
2
Select the required time using the twist knob.
3
Touch the
Š
symbol again to confirm the selected
time.
The cooking time begins to elapse.
Changing or deleting the time
Touch the
Š
symbol and use the twist knob to change
the time or set it to
‹‹
.
When the time has elapsed
A signal sounds for three minutes.
‹‹
flashes in the
timer display. Touch the
Š
symbol again: The displays
go out and the audible signal ceases.
Timer plus
If you press and hold the symbol
Š
for a few seconds
before the audible signal ceases, the stopwatch is
activated.
The display for the stopwatch shows the elapsed time
since the end of the set timer time. The time that was
previously set flashes in the timer display.
Press and hold the
Š
symbol for a few seconds. This
stops the stopwatch, and the indicators go out.
The function has been deactivated.
Stopwatch function
The stopwatch shows the cooking time that has elapsed
so far in minutes and seconds (mm.ss). The maximum
duration is 99 minutes and 59 seconds (99.59). If this
value is reached, the display starts again at 00.00.
The stopwatch works independently of the hotplates and
other settings. This function does not automatically
switch off a hotplate.
Activating
Touch the
®
symbol.
‹‹
.
‹‹
appears in the stopwatch
display.
The time begins to elapse.
Deactivating
Touching the
®
symbol stops the stopwatch function.
The stopwatch displays remain lit.
If you touch the
®
symbol again while it is still orange,
the time will continue to elapse.
If you touch and hold the
®
symbol, the displays will go
out.
The function is deactivated.
