17
Twistpad with Twist Knob
en-us
j
Twistpad with Twist Knob
Twistpad with Twist Knob
The twistpad is the area in which you can use the twist
knob to select the cooking zones and heat settings. The
twist knob automatically centers itself in the twistpad
area.
The twist knob is magnetic and is placed on top of the
twistpad. To activate a cooking zone, press the twist knob
so that it tilts in the appropriate area for the required
cooking zone. Turning the twist knob selects the heat
setting.
Position the twist knob on the twist pad so that it is in the
center of the indicators that delimit the twist pad area.
Note:
Even if the twist knob is not entirely central, this
will not under any circumstances affect how the twist
knob works.
Remove the twist knob
Removing the twist knob activates the wipe-protection
function.
The twist knob can be removed during cooking. The wipe-
protection function is activated for 10 minutes. If the twist
knob is not returned to its position before this time
elapses, the cooktop switches off.
9
WARNING
Risk of fire!
If during these 10 minutes a metallic object is
placed in the twistpad area, the cooktop may
continue to heat up. Therefore, always switch off
the cooktop using the main switch.
Storing the twist knob
A strong magnet is located inside of the twist knob. Keep
the twist knob away from magnetic data carriers such as
credit cards and cards with magnetic strips. Otherwise,
these data carriers may be damaged beyond repair.
The magnet may also cause faults on televisions and
screens.
Note:
The twist knob is magnetic. Metal particles stuck
to the bottom may scratch the surface of the cooktop.
Always clean the twist knob thoroughly.
1
Operating the appliance
Operating the appliance
This chapter explains how to set a cooking position. The
table shows heat settings and cooking times for various
meals.
Switching the cooktop on and off
Use the main switch to switch the cooktop on and off.
When you first switch on the appliance, you will be
prompted to set up your home network. The
·
symbol will
be lit dimly for a few seconds on the display panel. To
begin setting up the connection, touch the
·
sensor and
proceed in accordance with the information given in the
section entitled
exit initial set-up, touch any sensor.
To switch on: Position the twist knob in the area in which
it can be used. Touch the
#
symbol. The symbols for the
cooking zones and the functions available at this time
light up.
‹
lights up next to the cooking zones. The
cooktop is ready for use.
To switch off: Touch the
#
symbol until the display goes
out. All cooking zones are switched off. The residual heat
indicator remains lit until the cooking zones have cooled
down sufficiently.
Notes
▯
If the appliance has not been connected to your home
network or the connection has been broken, network
connection initial set-up will be activated whenever
you switch on the cooktop.
▯
The cooktop switches off automatically if all cooking
zones have been switched off for more than
20
seconds.
▯
The selected settings are stored for five seconds after
the cooktop has been switched off.
If the cooktop is switched back on during this period,
the previously set heating settings flash. To apply
these settings, tap on the twist knob within the next
five seconds.
If you do not tap the twist knob or if you touch a
different sensor key, all previous settings will be
deleted.
Summary of Contents for CI 282 601
Page 1: ...DJJHQDX Use and care manual CI 282 601 Cooktop...
Page 2: ...2...
