23
Booster function for saucepans
en-us
Timer plus
If you press and hold the
Š
symbol for a few seconds
before the audible signal ceases, the stopwatch is
activated.
The display for the stopwatch shows the elapsed time
since the end of the set timer time. The time that was
previously set flashes in the timer display.
Press and hold the
Š
symbol for a few seconds. This
stops the stopwatch, and the displays go out.
The function has now been deactivated.
Stopwatch function
The stopwatch shows the cooking time that has elapsed
so far in minutes and seconds (mm.ss). The maximum
duration is 99
minutes and 59
seconds (99.59). If this
value is reached, the display starts again at 00.00.
The stopwatch works independently of the elements and
other settings. This function does not automatically
switch off an element.
Activating
Touch the
®
symbol.
‹‹
.
‹‹
appears in the stopwatch
display.
The time begins to elapse.
Deactivating
Touching the
®
symbol stops the stopwatch function. The
stopwatch displays remain lit.
If you press the
®
symbol again while it is still orange,
the time continues to elapse.
If you press and hold the
®
symbol, the displays go out.
The function is deactivated.
v
Booster function for saucepans
Booster function for saucepans
This function allows large volumes of water to be heated
up even more quickly than with power setting
Š
. The
Booster function temporarily increases the top output of
the selected element.
This function can be activated for an element at any time,
provided the other element in the same group is not in
use (see illustration).
Note:
The Booster function can also be activated on the
flexible cooking zone if this is being used as a single
element.
Activating
1.
Select the element.
2.
Touch the
Ž
symbol.
The
˜
indicator lights up.
The function has now been activated.
Deactivating
1.
Select the element.
2.
Touch the
Ž
symbol, turn the twist knob or select a
different function.
The
˜
indicator goes out and the element switches
back to the
Š
heat setting.
The function is deactivated.
Notes
▯
In certain circumstances, this function may switch
itself off automatically in order to protect the
electronic elements inside the cooktop.
▯
If a heat setting had been made before activating the
function, it is once again adopted automatically after
deactivating the function.
Summary of Contents for CI 282 601
Page 1: ...DJJHQDX Use and care manual CI 282 601 Cooktop...
Page 2: ...2...
