42
en-us
Childproof lock
A
Childproof lock
Childproof lock
Activating and deactivating the
childproof lock
The cooktop must be switched off.
To activate: Remove the twist knob from the cooktop. A
signal sounds. The
H
indicator lights up for 10
seconds.
The cooktop is locked.
To deactivate: Place the twist knob on the twistpad.
Note:
Removing the twist knob when the cooktop is
switched on initially activates the cleaning protection
display. If the twist knob is not put back on after
10
minutes, the cooktop switches itself off and the child
lock is activated.
k
Display cleaning protection
Display cleaning protection
If you wipe over the control panel while the cooktop is
switched on, settings may be changed. To avoid this, the
cooktop has a function you can use to lock the control
panel for cleaning.
Activating:
Remove the twist knob.
An audible signal sounds. The
−
indicator and the
cooktop settings flash. The heating process is
interrupted. If a cooking timer is programmed, this will be
paused. The control panel is locked for 10
minutes.
You can now wipe over the surface of the control panel
without altering the settings.
Deactivating:
Put the twist knob back on within
10
minutes.
The control panel is unlocked. The cooktop reheats to the
previous settings.
To end the function early, put the twist knob back on
before the 10
minutes have elapsed.
b
Automatic shut-off
Automatic shut-off
If an element has been in operation for a longer period
and no settings are changed, the automatic safety switch-
off function is activated.
The element ceases to heat up. A signal sounds and the
residual heat indicator
œ
or
•
appears on the element
display.
The element can be selected again at any time and re-set.
When the automatic safety shut-off is activated depends
on which heat setting has been set (after 1
to 10
hours).
Summary of Contents for CI 282 601
Page 1: ...DJJHQDX Use and care manual CI 282 601 Cooktop...
Page 2: ...2...
