48
en-us
Home Connect
Connecting to the network
Connecting to the network
1.
Open the basic setting
™Š
.
2.
Touch the
p
symbol repeatedly until the
•’‚
and
¯“£
settings flash alternately.
‹””
lights up on the cooking zone display.
3.
Use the twist knob to set the value to
’‹‚
, "Connect automatically", or
’‹ƒ
"Connect manually".
4.
Follow the instructions in the section entitled
"Automatic registration in the home network" or
"Manual registration in the home network".
Connect to App
If the Home Connect app is installed on your mobile
device, you can connect it to your cooktop.
Notes
▯
The appliance must be connected to the network.
▯
The app must be open and be set up.
▯
If your extractor hood is directly connected, first
disconnect the cooktop from your home network and
then initiate the connection process again. ,
"Connecting to the network" on page 48
1.
Open the basic setting
™Š
.
2.
Touch the
p
symbol repeatedly until the
•’ƒ
and
˜‘‚
settings flash alternately.
‹””
lights up on the cooking zone display.
3.
Set the value to
‹¯
using the twist knob.
4.
Launch the app on your mobile device and follow the
instructions to complete the connection process.
When the
‹¯
value stops flashing on the cooing zone
display and the
‹””
value lights up again, the
registration process is complete.
Settings via app
Using the Home Connect app, you can easily access the
basic settings for your cooktop and send settings for the
cooking zones to the cooktop.
Notes
▯
Before you can change the basic settings, the cooktop
must be switched off.
▯
Operating the appliance directly from the appliance
always takes priority. It is not possible to operate the
appliance using the Home Connect app during this
time.
▯
When the appliance is delivered, the settings transfer
option is already activated by default.
▯
If the settings transfer option has been deactivated,
only the cooktop's operating statuses will be
displayed in the Home Connect app.
1.
Open the basic setting
™Š
.
2.
Touch the
p
symbol repeatedly until the
•’…
and
¥“†
settings flash alternately.
3.
To activate transfer, select the
‹¯
value with the twist
knob. To deactivate transfer, select the
‹””
value.
Confirming settings
As soon as cooking settings are transmitted to a cooking
zone, the cooking zone display starts to flash. To confirm
that you want to use these settings, touch the flashing
indicator
·
. To discard the settings, touch any other
button on the cooktop.
W
W
'
W
'
Summary of Contents for CI 282 601
Page 1: ...DJJHQDX Use and care manual CI 282 601 Cooktop...
Page 2: ...2...
