41
Wireless cooking sensor
en-us
2.
Open the cap on the cooking sensor. Remove the
battery from the lower section of the casing and insert
a new battery (make sure that the battery terminals (+/
-) are the right way round).
9
CAUTION
Do not use metal objects to remove the battery.
Do not touch the battery terminals.
3.
Close the cap on the cooking sensor (the indentations
for the screws on the cap must be aligned with the
indentations on the lower section of the casing).
Tighten the screws with a screwdriver.
4.
Put the silicone cover back on the lower section of the
cooking sensor casing.
Note:
Use only high-quality CR2032
batteries in order to
maintain a long service life.
Declaration of Conformity
Gaggenau Hausgeräte GmbH hereby declares that the
appliance with wireless cooking sensor function meets
the basic requirements and other relevant provisions of
the Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.gaggenau.com among the additional
documents on the product page for your appliance.
The logos and the Bluetooth® brand are registered
trademarks and property of Bluetooth SIG, Inc. These
trademarks are used by Gaggenau Hausgeräte GmbH
under license. All other trademarks and brand names are
owned by the respective companies.
