background image

Timer operation

Changing or erasing a given time value

• Touch the timer symbol.

• You can now change the programmed time using

the UP-/DOWN-symbols. Touch the UP-/DOWN-
symbols simultaneously or touch the DOWN-
symbol, until

00

shows on the display. The spot on

the cooking zone display disappears. The timer
program is now switched off. The cooking zone
remains on the selected cooking level without
timer operation. 

Programming the timer without cooking zone
switch-off

It is also possible to use the timer independently
from the cooking zones and without switch-off
function.

Any value between 1 and 90 minutes can be
entered on the timer. 

• Touch the timer symbol. The timer display flashes

00

. Select the required time using the 

UP-/DOWN-symbols. 

• The value is confirmed a few seconds later by an

audible signal and the timer starts. Alternatively
you can confirm the values by again touching the
timer symbol in the control panel. 

• The timer display shows the elapsed time.

• After the elapse of the programmed time an

audible signal is sounded. The timer display
flashes. By touching any symbol on the display the
audible signal is switched off.

• The timer can be switched off at any time 

by touching the timer symbol and then the
UP-/DOWN-symbols simultaneously.

16

Programming the timer without 
cooking zone switch-off

Summary of Contents for CK 481































Reviews: