24
en
Daily care and cleaning
Cleaning the milk system
The milk system is automatically cleaned with a short jet
of steam directly after preparing a milk drink.
Important:
Clean the milk system manually on a weekly
basis, or more frequently if required.
m
Warning – Risk of burns!
The beverage dispenser gets very hot. After use, let it
cool down first before touching it.
Cleaning the milk system automatically
1
Turn the function selector to
S
.
2
Use the rotary selector to select "Clean milk
system".
3
Touch the
™
symbol.
The cleaning programme starts. The information in
the display guides you through the programme.
4
Open the door.
5
Remove the milk tube from the milk container and
wipe it down. Insert the end of the milk tube into the
hole in the coffee residue container.
6
Close the door.
7
Place a container with a capacity of 0.5 l under the
beverage dispenser.
8
Touch the
I
symbol.
The programme runs for approx. 1 minute.
Then empty the container.
9
Touch the
™
symbol.
The programme has finished.
Cleaning the milk system manually
Take the milk system apart to clean it:
1
Push the beverage dispenser down completely and
pull the cover forwards to remove.
2
Press the snap lever to the left of the beverage
dispenser downwards and pull the beverage
dispenser straight forwards.
3
Detach the milk hose and dismantle the top and
bottom sections of the beverage dispenser.
4
Separate the milk hoses, connecting element and
milk tube.
5
Clean the individual parts with a detergent solution
and a soft cloth.
6
Rinse all parts with clean water and dry.
7
Put the individual parts back together again (also
see quick reference guide).
8
Firmly attach the beverage dispenser straight from
the front onto the three connections.
9
Replace the cover.