Gaggenau CV 281, Instruction Manual

15

 Operating the appliance      

en

Switching the ventilation system on 
and off

Note: 

Always adjust the setting according to the current 

conditions. To eliminate strong cooking smells, select a 
high fan setting.

Note: 

If no metal grease filter is available, the 

ventilation system cannot be switched on. Insert the 
metal grease filter. The hob functions are also available 
if there is no metal grease filter.

~

 "Cleaning" 

on page 26

Note: 

Do not obstruct the ventilation openings. Do not 

place objects on the filter cover, as this will reduce the 
power of the ventilation system.

Note: 

Using tall items of cookware may prevent the 

extraction system from working at optimum power. The 
extraction power can be improved by placing a lid on the 
cookware at an angle.

Switching on the ventilation system

If the ventilation system cannot be switched on, make 
sure that the metal grease filter is correctly inserted.

1

Touch the 

}

 symbol.

The ventilation system will start at fan setting 

ƒ

. 

The fan setting that is selected will be displayed.

Notes

–

Heat settings cannot be changed while the 
setting is being applied for the ventilation 
system.

–

During a period of a few seconds, a fan setting 
for the ventilation system can be selected. The 
settings area can then be used for selecting the 
heat settings again.

2

Select the required setting from the setting area.
The setting that is selected will be displayed.

3

To set a different setting, touch the 

}

 symbol and 

select the required setting from the settings area.
The setting that is selected will be displayed.

Switching off the ventilation system

If you want to switch off the appliance, touch the 

#

 symbol. If you only want to switch off the ventilation 

system, proceed as follows:

1

Touch the 

}

 symbol.

2

Select the 

‹ 

 symbol in the settings area.

3

Touch the 

}

 symbol to switch to the settings area 

for the hob.

Note: 

The run-on will start once the appliance has been 

switched off (depending on the basic settings selected).

Intensive setting

Activate intensive mode if strong odours or large 
amounts of steam are produced. In this mode, the 
ventilation system briefly operates at maximum power. It 
automatically switches back to a low setting after a 
short time.

Switching on

1

Touch the 

}

 symbol.

ƒ 

 will be shown on the display panel.The line 

below fan setting 

ƒ

 will light up.

2

Touch the 

Ž

 symbol.

˜

 will be shown on the display panel. The line below the 

˜

 symbol will be lit.Intensive mode is now activated.

Note: 

After eight minutes, the appliance automatically 

switches back to fan setting 

Š

.

Switching off

1

Touch the 

}

 symbol.

2

Set fan setting 

‹

 or a different fan setting in the 

settings area.