background image

27

 Cooking sensor mode      

en

Ü

 Cooking sensor mode

Cooking sensor mode

The cooking sensor processes make cooking easy and 

guarantee exceptional results.

The wireless cooking sensor measures the temperature 
of the cookware continuously. This allows cooking to be 
precisely regulated and the temperature to be 
maintained at the required level at all times in order to 
prevent excessively vigorous boiling and to achieve 
perfect cooking results.

You can add your food once the selected temperature 
has been reached. The temperature is automatically 
kept constant without you having to change the heat 
setting.

Cooking sensor mode is available anywhere on the 
cooking surface if you have a wireless cooking sensor.

The wireless cooking sensor forwards the temperature 
of the cookware to the control panel.

The hob has a wireless cooking sensor. If required, this 
can be purchased at a later point from specialist 
retailers, or through our technical after-sales service or 
our online shop. You can use up to three cooking 
sensors at the same time.

Note: 

You can order it by specifying the reference 

number CA060300. 

For more information about the cooking sensor, see the 
section entitled 

~

 "Wireless temperature sensor"

Cooking processes with the cooking 
sensor

Cooking sensor mode is used to select the best cooking 
method for each kind of food.

The table shows the different cooking processes that 
are available:

Cooking processes

Temperature

Cookware

Suitable for

Keeping warm, heating

70 °C

E.g. punch, goulash

Poaching in milk

85 °C

E.g. panna cotta, rice pudding

Poaching in water

90 °C

E.g. rice, quinoa

Boiling

100 °C

E.g. pasta, gnocchi, vegetables

Cooking in a pressure cooker

115 °C

E.g. home-made broths, pulses

Deep-fat frying at a low temperature *

160 °C

E.g. doughnuts, fritters

Deep-fat frying at a medium temperature *

170 °C

E.g. breaded fish, meatballs

Deep-fat frying at a high temperature *

180 °C

E.g. chips, frozen

*Heat the oil with the lid on and deep-fat fry with the lid off.

Summary of Contents for CX 482

























































Reviews: