background image

Operation

 en-us

29

6.19 Basic settings

You can configure your appliance to meet your needs.

Basic settings overview

Here you can find an overview of the basic settings and the preset factory settings.

Display

Setting

Options

Brightness

Change the brightness of the touchscreen display.

Start screen

Choose whether or not the brand logo will be displayed when you turn on

the cooktop.

Sounds

Select which signal tones you want the appliance to use.

Power management

Restrict the total power of the appliance and adapt it to the local mains con-

nection.

Professional cooking - power

levels

Change the default power levels of the cooking areas for professional cook-

ing mode.

Dynamic cooking - power levels Change the default power levels of the cooking areas for dynamic cooking

mode.

Single dynamic cooking - power

levels

Change the default power levels of the cooking areas for single dynamic

cooking mode.

Cooking sensor calibration

Set your height above sea level to adjust the boiling point.

Cooking sensor pairing

Connect the wireless cooking sensor to the cooktop.

Temperature format

Change the temperature format.

Language

Change the language used on the display.

Start mode

Select the cooking mode that you want the cooktop to start with.

Appliance index and production

date

View information about your appliance.

Automatic restore

Set how long the appliance saves the most recently used settings after it

has been turned off.

Presettings

Restore all settings to the factory settings.

Panel lock

Set an automatic panel lock.

Hood control

Control your hood from the cooktop. Connect the two appliances in the

home network or by connecting the hood directly to the cooktop.

Home Connect™

Connect the appliance to your home network and a mobile end device.

→ 

"Home Connect™ ", Page 30

Changing the basic settings

Requirements

¡

The cooktop is turned on.

¡

All cooking zones are deactivated.

1.

Touch   to enter the basic settings menu.

a

The first setting Brightness is displayed.

2.

Swipe to the left or right to select the required setting.

Summary of Contents for CX 492 611













































Reviews: