en
Booster for pots
14
4.
Within the next 10 seconds, slide your finger up or
down and set the required time. You can set hours,
minutes and seconds.
5.
Touch to confirm the selected setting.
a
and the set time are shown in the function bar.
a
The set time begins to count down.
a
When the time has elapsed, a signal sounds.
a
00.00. flashes in the short-term timer display.
6.
Press .
a
The displays go out and the signal tone stops.
Changing or deleting the short-term timer
1.
Touch .
2.
Change the set time.
3.
Touch to confirm the setting.
4.
Touch to delete the time.
Pausing the short-term timer
1.
Press .
2.
Press .
a
The timer stops.
3.
Touch first and then to restart it.
a
The kitchen timer starts again.
10.3 Runtime
The stopwatch function displays the time that has
elapsed since activation.
Activating the stopwatch function
1.
Press .
2.
Select .
3.
Touch to confirm the selection.
a
The function bar shows 00.00 and .
a
The time starts to elapse.
Pause Runtime.
1.
Touch in the main view.
2.
Touch
a
The stopwatch stops.
3.
Touch first and then to restart it.
a
The stopwatch continues to run.
Deactivating the stopwatch function
1.
Touch .
2.
Touch .
a
The stopwatch stops.
a
00.00 appears in the main view.
3.
Touch to exit the menu and return to the main
view.
11 Booster for pots
This function allows large volumes of water to be
heated up even more quickly than with power level 9.
The booster function can be selected if lights up in
the settings area for the cookware. The booster func-
tion for pots is only available for one pot on each side
of the cooking surface.
If the function is activated and you select a second
cooking zone on the same side of the cooking surface,
the appliance deactivates the function. The appliance
automatically sets power level 9.0.
If the function is activated in the centre of the cooking
surface, you can change the settings for other cook-
ware on the right- and left-hand sides of the hob.
11.1 Activating the booster function for pots
1.
Select the cooking zone.
2.
Swipe your finger upwards until appears.
a
The function is activated.
11.2 Switching off Booster for pots
1.
Select the cooking zone.
2.
Set a different power level in the settings area.
a
The function is switched off.
Summary of Contents for CX 492
Page 1: ...en Information for Use CX 492 Full surface induction cooktop Gaggenau...
Page 34: ......
Page 35: ......
