en
Power limitation
24
Symbol
Settings
Description and options
Appliance number
and production date
View information about the appliance.
Automatic restore
Set how long the appliance saves the most recently used settings after it has
been switched off.
Presettings
You can restore all settings to the factory settings.
Childproof lock
Disable the hob and prevent children from using it without supervision.
Hob-based hood con-
trol
The ventilation system can be controlled from the hob either by connecting the
appliances to your home network or by directly connecting the ventilation sys-
tem to the hob.
Home network
Set up the hob to automatically log into your home network via WPS, or you can
do this manually.
22.2 Changing the basic settings
Requirement:
All cooking zones are switched off.
1.
Touch .
a
The basic settings menu is displayed.
a
The first option displayed is brightness.
2.
Use your finger to scroll to the left or right in order
to select a different option.
3.
Touch to change the setting.
4.
Touch
to confirm the changes.
5.
Touch to discard the changes.
22.3 Exiting the basic settings
▶
Touch the main switch .
23 Power limitation
You can use this function to set the total power of the
hob.
The hob is set at the factory. You can find the max-
imum power of the hob on the rating plate. You can
use this function to adjust the configuration to the re-
quirements of each electrical installation.
To ensure that this set value is not exceeded, the hob
automatically distributes the available power as needed
between the cooking zones that are switched on.
While this function is activated, the output of each
cooking zone may temporarily fall below the nominal
value. In order to not exceed this set value, the hob
automatically distributes the available power as needed
between the cooking zones that are switched on . The
appliance regulates and selects the highest power level
automatically.
You can find out how to do this in the "Basic settings"
section →
24 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
¡
Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
24.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡
The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Summary of Contents for CX 492
Page 1: ...en Information for Use CX 492 Full surface induction cooktop Gaggenau...
Page 34: ......
Page 35: ......
