Gaggenau CX 492 Information For Use Download

Page: 29 / 36

FAQs

Question

Answer

The cookware display on
the touch display does not
correspond to the size or
shape of the cookware.

There are more than 8 items of cookware on the cooking surface.
The cookware is too small: We recommend a diameter of 90 to 340 mm.
Use a bigger item of cookware or cookware that is suitable for induction cooking.
Alternatively, move the cookware to a different position on the cooking surface.
You can find information on which cookware is suitable for induction cooking in
the "Suitable cookware" section. →

Page 5

An item of cookware that is
not displayed on the touch
display is located on the
cooking surface.

Page 5

Two items of cookware are
on the cooking surface, but
these are shown on the
touch display as one item
of cookware.

If you place two items of cookware very close together on the cooking surface,
this may appear on the touch display as one item of cookware.
Move the items of cookware further away from each other until they are shown as
two individual items of cookware on the touch display.

One item of cookware is on
the cooking surface, but
two or more are shown on
the touch display.

The base of the cookware may be deformed or embossed, or the cookware is not
suitable for induction cooking.
Check the flatness of the cookware and place it back on the cooking surface.
You can find information on which cookware is suitable for induction cooking in
the "Suitable cookware" section. →

Page 5

You cannot use any cook-
ware that is on the cooking
surface.

You can place up to 8 items of cookware on the cooking surface but only up to 6
evenly distributed items can be used at the same time.
You can find more information on the type, size and positioning of suitable cook-
ware in the "Suitable cookware" section. →

Page 5

You can cook with up to 3 items of cookware on each side at the same time. If an
item of cookware is located in the centre of the cooking surface or the cookware
is too big, this restricts the number of active items of cookware.
You can find more information on the type, size and positioning of suitable cook-
ware in the "Suitable cookware" section. →

Page 5

One of the items of cookware is not suitable for induction cooking. ⁠ appears be-
side the unsuitable cookware on the touch display.
You can find more information on the type, size and positioning of suitable cook-
ware in the "Suitable cookware" section. →

Page 5

The appliance has exceeded its maximum power consumption or the Power limit-
ation function has been switched off.
Check the installation and set the Power limitation function correctly.

The power level cannot be
increased.

The appliance has exceeded its maximum power consumption or the Power limit-
ation function has been switched off.
Change the distribution of the cookware on the cooking surface.
Check the installation and set the Power limitation function correctly
You can find out how to do this in the "Basic settings" section →

Page 23

The cooking sensor is not
available.

The appliance has exceeded its maximum power consumption or the Power limit-
ation function has been switched on.
Switch off or reduce the power levels for the other item of cookware. Change the
distribution of the cookware on the cooking zone.
Check the installation and set the Power limitation function correctly.
Power limitation →

Page 24

Cooking times are longer if
you use the appliance in-
tensively.

This may be due to the fact that internal safety mechanisms are preventing the
cooker from overheating.
Try to change the position of the cookware.

Bubbles are forming with
an uneven distribution
within the cookware.

Depending on the selected power level, type of cookware or the combination with
other cookware, bubbles may form unevenly. However, this has no effect on the
temperature or the cooking process.
You can find information on which cookware is suitable for induction cooking in
the "Suitable cookware" section. →

Page 5