Gaggenau CX482611, Installation Instructions Manual

en-us 

Prepare installation space

6

¡

If the thickness of the countertop into which the cooktop

is installed does not comply with the specifications, rein-

force the worktop using a fire- and water-resistant mate-

rial until it reaches the minimum thickness. Otherwise,

sufficient stability cannot be assured.

¡

The countertop into which the cooktop is installed

should withstand loads of approx. 133 lbs (60 kg).

¡

Confirm the cooktop is level only after it has been in-

stalled.

3.1 Flush mounting

The cooktop can be mounted flush into the countertop.
Notes

¡

Any cutout work on the countertop must be performed

in a workshop according to the installation diagram.

¡

The cutout edge is visible on the surface after installa-

tion. Ensure that the cutout is made cleanly and pre-

cisely.

¡

Clean and degrease the cutout edges with a suitable

cleaning agent; follow the silicone manufacturer's pro-

cessing instructions.

Countertop material guide for flush mounting

Refer to the following chart to see if flush mounting is pos-

sible. All countertop materials must be temperature- and

water-resistant.

Countertop

material

Notes

Stone

Suitable for flush mounting

Plastic, such as

Corian®

Suitable for flush mounting

Solid wood

Only in consultation with the manufac-

turer of the countertop. Seal cutout

edges.

Tiled surfaces

Suitable for flush mounting

If necessary, raise the support surfaces

using heat and water resistant strips.

( ) = mm 

(3.5    ) 

-0.5

²/16"

-0.02"

(3.5    ) 

-0.5

²/16"

-0.02"

Other

Only in consultation with the manufac-

turer of the countertop.

Particle board

Not suitable for flush mounting.

3.2 Cutout dimensions for 30" cooktops

Refer to these measurements for the models stated here.

¡

CX 482 611

3.3 Cutout dimensions for flush mounted 30"

cooktops

Refer to these measurements for the models stated here.

¡

CX 482 611