Gaggenau CX482611, Installation Instructions Manual

Installation procedure

 en-us

9

3.7 Combining several Vario appliances

1.

If you want to combine several Vario appliances, the

connecting strip VA 420 000/001/010/011 is required.

You can purchase it separately as a special accessory.

Consider additional space requirement for the connect-

ing strip between the appliances when making the

cutout. Refer to the Installation Instructions of

VA 420 000/001/010/011.

The appliances can also be installed in individual

cutouts. Ensure a minimum distance of 2" (51 mm) be-

tween the appliances.

2.

When combining appliances with appliance cover and

appliances without appliance cover, you can use the ap-

pliance extensions VA 450 110/401/600/800/900 to bal-

ance out dimension differences, if required.

Installation procedure

4 Installation procedure

Installation procedure

Follow these instructions to install the cooktop into the

countertop.

CAUTION

Sharp edges.

▶

Use protective gloves when installing the appliance.

CAUTION

The appliance is heavy.

▶

It is recommended that two people install this appliance.

4.1 Installing the heat shield

For safety reasons, the heat shield must be properly in-

stalled when closed cabinets are used. This prevents com-

ponents from overheating as a result of the recirculation of

hot air from the cooktop. The heat shield is the same width

as the cooktop.

CAUTION

Sharp edges.

▶

Use protective gloves when installing the heat shield.

Requirement: You have unpacked the cooktop.

▶

For shipping, the heat shield is screwed to the bottom of

the cooktop. Unscrew the fastening screw on heat

shield.

a

The heat shield will be able to rotate freely.

4.2 Securing the cooktop to the countertop

The cooktop must be secured from below using the hold-

down brackets provided, so it does not slip.

1.

Place the cooktop face down on a soft underground.