12
Additional options
* depending on model
Additional options
9
can be set with the buttons.
Turbo
*
The programme running time is reduced significantly in
the Turbo programme. The energy consumption is
increased by up to 30% due to more intensive heating.
The time reduction affects the following programmes:
Auto:
Time reduction up to 25 %
Eco:
Time reduction up to 58 %
Half load
*
If you have only a few items to wash (e.g. glasses,
cups, plates), you can switch to “half load”. This will
save water, energy and time. It is recommended to put
a little less detergent in the detergent dispenser than
for a full load.
Hygiene
*
The temperature is increased during the rinsing
process. This increases the hygiene status. This
additional option is ideal for cleaning e.g. chopping
boards and baby bottles.
IntensiveZone
*
Perfect for a mixed load. You can wash very soiled pots
and pans in the lower basket together with normally
soiled utensils in the upper basket. The spray pressure
in the lower basket is intensified, the rinsing
temperature is increased slightly.
Extra drying
*
An increased temperature during the final rinse and an
extended drying phase mean that even plastic parts dry
well. There is a slight increase in the energy
consumption.
Washing the dishes
Programme data
The programme data (consumption values) can be
found in the summary of instructions. They refer to
normal conditions and the water hardness set value
. Different influencing factors such as water
temperature or line pressure may result in deviations.
Aqua sensor
*
* depending on model
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The Aqua sensor is used according to the programme.
If the Aqua sensor is active, “clean” rinsing water can
be transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained and is replaced
with fresh water. In the automatic programmes the
temperature and running time can also be adjusted
to the degree of soiling.
Switching on the appliance
Turn on the tap fully.
Open the door.
Switch on ON/OFF switch
1
.
The display of the last selected programme flashes.
This programme remains selected if no other
programme button
2
is pressed.
The expected programme duration flashes on the
digital display
3
.
Press the START button
10
.
Close the door.
The programme starts running.
Summary of Contents for DF 241-161
Page 2: ......
Page 21: ...21 en Subjekt to modification...
