Basic operation
en
39
open the appliance door immedi-
ately after the programme has
ended, the appliance will switch off
after 4 seconds.
Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a few
minutes and then close it. This will help
prevent excess pressure building up in
the appliance and stop the appliance
door bursting open.
1.
Press .
a
The programme is saved and the ap-
pliance switches off.
2.
Press to resume the programme.
Terminate programme
To end a programme early or to switch
from a programme that has already
started, you will need to terminate it
first.
1.
Open the appliance door.
2.
Press
for approx.
3 seconds.
a
The programme is terminated and
ends after approx. 1 minute.
a
The display shows "Programme was
terminated.", followed by "Finished!".
Display programme informa-
tion
You can show information about pro-
grammes and additional functions on
the display.
1.
Press
.
2.
Press the programme button or an
additional function.
Switching off appliance
1.
Please note the information on Safe
use →
.
2.
Press .
Tip:
If you press during the wash
cycle, the programme currently running
will be interrupted. When you switch
the appliance back on, the programme
continues automatically.