en
Basic settings
40
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Selection
Description
Time setting
00:00 - 24:00
Set the current time.
The setting depends on the time format selected.
Time format
12 h
24 h
1
Set the time format.
Time display
In hours
Time
1
Set the time display for the end of the programme.
"with display "Finish in"" shows the remaining time
the programme has to run, e.g. 3h 25min.
"or "Finish at"." shows the time when the pro-
gramme will end, e.g. 15:20 hours.
Sprache/Language
See selection on the ap-
pliance.
Select the menu language.
Water hardness
0 - 62
16 - 20 medium
1
Set the water hardness.
"Overview of water hardness settings", Page 30
Rinse aid dispenser
0 - 6
5
1
Set or switch off the amount of rinse aid to be dis-
pensed.
"Setting the amount of rinse aid", Page 33
Sensor setting
Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
Extra Dry
on
off
1
Switch Extra Dry on or off for each operation.
For a better drying result the temperature is in-
creased during the final rinse. This may increase
the running time slightly.
Please take care with delicate tableware.
Water connection
Cold water
1
Hot water
Set cold water or hot water connection.
Only set the appliance to hot water if this can be
prepared with little energy and a suitable installa-
tion is available, e.g. solar heating system with cir-
culation line. The water temperature should be at
least 40 °C and max. 60 °C.
Eco forecast
on
off
1
Switch EcoCheck on or off.
When selecting the programme, the average water
consumption and energy consumption is briefly
shown on the display.
1
Factory setting (may vary according to model)