26
en-us
Dishwasher Cycles
/
Dishwasher Cycles
Dishwasher Cycles
Note:
In order to save energy, it is recommended to set
the
Auto Power Off
feature to “After one minute”.
Note:
The Energy Guide label was based on the
Normal
or
Regular
soil sensing cycle as follows: The unit was tested
without any rinse aid (liquid) in the rinse aid dispenser
9"
. A single dose of detergent was inserted into the
detergent dispenser
9*
, with no detergent being used in the prewash. The unit was not subjected to truncated
testing per the definitions in the test procedure. We recommend that dish loads such as the one in the energy
certification test have the rack position set in the highest position.
Wash cycle
Recommended use
Possible wash cycle option
AUTO
150 - 160° F
This cycle cleans items having baked-on or hard dried-on
food soils. These items may require soaking or hand
scouring.
all
AUTO Wash
130 - 150° F
This cycle is appropriate for mixed loads.
It is optimised according to the soiling with the aid of
sensors.
all
Regular
(see note at bottom of
table)
Recommended for daily, regular or typical use to
completely wash a full load of normally soiled dishes.
all
Note:
In order to obtain
optimal performance with
minimum energy
consumption, it is
recommended to disable all
available options and
settings, except
Auto Power
Off
Quick Wash
Cleans lightly soiled dishes with easy to remove food
soils.
Extra Dry
Glass Care
A cycle for lightly soiled dishes which is ideal for
temperature sensitive dishes or silverware. In this cycle
the temperature is reduced to help prevent dishes from
becoming damaged. It is especially helpful to reduce a
cloudy or etched appearance on glasses.
Note:
Some glasses are more prone to etching due to the
glass manufacturing process.
all
Rinse
Use this cycle if you need to pre-rinse dishes to avoid
odors. Place unrinsed dishes inside the dishwasher and
select the
Rinse
cycle. Uses less water than hand rinsing
and very low energy.
