35
Troubleshooting
en-us
3
Troubleshooting
Troubleshooting
Dishwashers may occasionally exhibit problems that are
unrelated to a malfunction of the dishwasher itself. The
following information may help you with a dishwasher
problem without involving a repair professional.
Note:
If the appliance stops during dishwashing or does
not start for any obvious reason, first run the cancel
wash cycle function (Reset) .
9
WARNING
Improper repairs or use of non-original
replacement parts may cause considerable
damage and put the user at considerable risk!
Always have repairs carried out by authorized
technicians. If a component has to be replaced,
always use original replacement parts.
Error message
Some faults are indicated at the top of the display
window
@
and on the front display *
):
and possible
remedies are offered (for example Filter system soiled
(E22) -->Clean filters).
* optional feature which may or may not be included with
your dishwasher
Fault table
Fault
Cause
Remedial action
Error code
“
:
‚‰
is lit.
Supply hose kinked.
Install supply hose without kinks.
Tap turned off.
Turn on the tap.
Tap jammed or calcified.
Turn on the tap.
Flow rate must be min. 10 l/min. when water
supply is open.
Filter in the water supply blocked.
Switch off the appliance and pull out the
mains plug. Turn off the tap. Unscrew water
connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
appliance.
Error code
“
:
‹ˆ
is lit.
Intake opening (on right inside of
appliance) covered by dishes.
Arrange dishes so that the intake opening
is not obstructed.
Error code
“
:
‚ƒ
is lit.
Heating element calcified or soiled.
Clean appliance with dishwasher cleaning
agent or descaler. Operate the dishwasher
with water softening system and check the
setting.
Error code
“
:
ƒƒ
is lit.
Filters
1Z
are soiled or blocked.
Clean filters.
