Gaggenau DF480700, User Manual

Options

 en-us

13

Cycle

Purpose

Cycle sequence

Usage
1) Hour/min.
2) Electrical/kWH
3) Water/gal

Quick Wash

Dishware:

¡

Cleaning delicate dishware,

silverware, temperature-sen-

sitive plastics and glasses.

Level of soiling:

¡

Removing lightly adhering

fresh food remnants.

Time-optimized:

¡

Cleaning 113 °F

¡

Intermediate rinse

¡

Final rinse 124 °F

¡

1) 0:30

¡

2) 0.400

¡

3) 2.7

Machine Care

Only when using unloaded ap-

pliance.

Machine Care 162 °F

¡

1) 2:00

¡

2) 1.100

¡

3) 2.5

Personalization

function

-

-

¡

1) 0:09 - 0:09

¡

2) 0.050 - 0.050

¡

3) 1.2 - 1.2

6.1 Energy Guide

The Energy Guide label was based on the Normal soil

sensing cycle.

The unit was tested without any rinse aid (liquid) in the

rinse aid dispenser. A single dose of detergent was in-

serted into the detergent dispenser, with no detergent be-

ing used in the prewash. The unit was not subjected to

truncated testing per the definitions in the test procedure.

We recommend that dish loads such as the one in the en-

ergy certification test have the rack position set in the

highest position. Recommended for daily, regular or typi-

cal use to completely wash a full load of normally soiled

dishes.

6.2 Personalization function 

With this function, you can save a combination of a Cycle

and an Option.

You can save the selected Cycle and Option combination

via the Home Connect app or on the appliance.

The pre-rinse cycle is pre-programmed to this button and

is fine for all types of dishware. The dishware is rinsed

with cold water.

Tip: 

You can use the Home Connect app to download ad-

ditional Cycles and Options and save them. 

1

Save Personalization function  on the appliance.

1.

Press 

⁠.

2.

Press the right cycle button.

3.

Press the button for the relevant options.

4.

Press Personalization Function button for 3 seconds.

a

The selected cycle and option will flash.

a

The Personalization Function button flashes.

a

The program combination is saved.

Tip: 

To reset the cycle, either use the Home Connect app

or reset your appliance back to the factory settings. 

→ 

"Overview of the basic settings", Page 29

Options

7 Options

Options

You can find an overview of the options that can be se-

lected here. Different options, which can be found on the

control panel of your appliance, are available depending

on the appliance configuration.

Option

Use

Extra Dry with Ze-

olite

Patented technology thoroughly

dries dishes and plastics such as

baby bottles and food storage con-

tainers. Natural minerals transform

moisture into heat up to 176F/80C to

get dishes, even plastics, 60% drier.

Extends drying time.

Sanitize

¡

To ensure a higher hygiene status

for the appliance and dishware,

the temperature is increased and

maintained for an extra-long pe-

riod.

¡

Especially suitable for cleaning

chopping boards or baby bottles.

¡

Continuous use of this option im-

proves the hygiene status.

¡

This will increase the run time and

energy consumption.

Intensive

¡

Switch on with mixed loads con-

taining dishware with different

soiling levels, e.g. place very

soiled pots and pans in the lower

rack and normally soiled dishware

in the upper rack.

¡

The spray pressure in the lower

rack is increased and the maxi-

mum program temperature held

longer. This will increase the run

time and energy consumption.

Power

¡

The run time is shortened by 15%

to 75% depending on the wash

cycle.

¡

An option can be added to the cy-

cle before it starts or at any time

when the cycle is running.

1

Depending on the appliance specifications