Cleaning and servicing
en
47
5.
Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
6.
Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
7.
Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
‒
Make sure that the arrow mark-
ings match up.
Cleaning spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
1.
Unscrew the upper spray arm
and pull down to remove .
1
2
2.
Pull up the lower spray arm to re-
move.
3.
Check the outlet nozzles on the
spray arms for blockages under
running water and remove any for-
eign bodies.
4.
Insert the lower spray arm.
a
The spray arm clicks into position.
5.
Insert the upper spray arm and
screw it firmly in place.
