en
Cleaning and servicing
50
4.
Pull down the micro filter to re-
move.
5.
Press the locking catches to-
gether and lift the coarse filter out
.
1
2
6.
Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and fine filter.
7.
Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter snap into posi-
tion.
8.
Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
Make sure that the arrow markings
match up.
9.
The spray arm will automatically re-
turn to the correct position when
starting, so it is not necessary to
reposition the spray arm to the
front.
18.6 Cleaning the spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
1.
Unscrew the upper spray arm
and pull down to remove .
1
2
