Troubleshooting
en
59
Fault
Cause and troubleshooting
Appliance interior still
wet after wash cycle.
Not a fault. The condensation drying principle causes
water droplets in the tub – they are indeed desirable
here. The moisture in the air condenses on the inside
walls, runs off and is pumped out.
No action required.
Remnants of food on
tableware.
Tableware is placed too close together or basket is
overfilled.
1.
Arrange tableware with sufficient space in between.
The spray jets must reach the surfaces of the table-
ware.
2.
Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked.
▶
Arrange tableware so that it does not obstruct
spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms.
Filters are soiled.
▶
Clean the filters.
→
Filters are inserted incorrectly and/or not engaged.
1.
Insert the filters properly.
→
2.
Engage the filters.
Washing programme selected too weak.
▶
Select a more intensive washing programme.
→
▶
Adjust the sensitivity of the sensors.
→
