19
en-us
Inserting the rack
The accessories feature a rack stop function. The rack
stop function prevents tilting of accessories when pulling
them out. You must insert accessories in the oven interior
correctly so that tilt protection will work.
Inserting the rack
1.
Tilt the rack to guide the rack stop in between the rails
of the rack holders
¨
. The rack stop has to face
downwards.
2.
Lower the rack and slide it into the oven, so that the
rack stop can engage
©
. Make sure the rack’s safety
rod is at the rear and top
ª
.
Turning on
1.
Set the required heating mode using the function
selector. The chosen heating mode and the default
temperature are displayed.
2.
If you want to change the default temperature:
set the required temperature with the rotary selector.
The preheating symbol
’
appears on the display. The
bar continuously shows the preheating status. When the
set temperature is reached, a signal sounds and the
preheating symbol
’
goes off.
Note:
The oven interior lighting stays switched off at a
temperature setting below 160° F (70°C).
Switching off:
Turn the function selector to
0
.
Quick heat
With the "Quick heat" function, your appliance reaches
the desired temperature particularly quickly in the top
heat, bottom heat, and top/bottom heat types of heating.
To ensure an even cooking result, do not place your food
in the cooking compartment until "Quick heat" is
complete and the
’
heat-up symbol goes out.
Note:
The "Quick heat" function is preset in the factory
settings. In the basic settings, you can select
’
Quick
heat or
“
Heat-up.
Safety shut-off
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after 12
hours if the appliance is not operated during this time. A
message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to
0
, after which you can
operate the appliance in the manner to which you are
accustomed.
