33
Pyrolytic self-cleaning
en
Pyrolytic self-cleaning
Pyrolytic self-
cleaning
When the pyrolytic self-cleaning function is running, the
oven heats up to 485 °C. Food remnants from roasting,
grilling or baking are incinerated and all you have to do
is wipe the ash out of the cooking compartment.
Pyrolytic self-cleaning takes 3 hours. You can delay the
pyrolytic self-cleaning switch-off time (for example, if
you want the pyrolytic self-cleaning function to run
overnight).
m
Warning – Risk of fire!
Loose food residues, grease and meat juices may catch
fire during pyrolytic cleaning. Remove coarse dirt from
the cooking compartment and from the accessories
before every pyrolytic cleaning cycle.
m
Warning – Risk of fire!
The appliance will become very hot on the outside
during the pyrolytic cleaning cycle. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of the
oven. Keep children at a safe distance.
m
Warning – Risk of serious damage to health!
The appliance will become very hot during the pyrolytic
cleaning cycle. The non-stick coating on baking trays
and tins is destroyed and noxious gases are released.
Never let non-stick baking trays and tins go through the
pyrolytic cleaning cycle. Only enamelled accessories
may be cleaned at the same time.
Preparing pyrolytic self-cleaning
Caution!
Fire risk! Loose food remainders, fat and roast juice can
catch fire. Wipe out the oven interior with a moist cloth.
▯
Remove coarse soiling and food remainders from
the oven.
▯
Clean the door seals manually, the inside of the
door and the glass pane because the pyrolytic
cleaning process does not clean these parts.
▯
Remove all loose interior parts from the oven
interior. The slide-in racks are pyrolysis-proof. There
must be no objects left in the interior.
▯
Close the oven door.
Starting pyrolytic self-cleaning
1
Set the function selector to
S
.
2
The
œ
symbol is displayed. Confirm with
™
.
3
The switch-off time, when pyrolytic self-cleaning will
be finished, is displayed. If required, move the
switch-off time with the rotary selector. Confirm
with
™
.
4
Remove all accessories and coarse soiling from the
oven interior. Confirm with
™
.
5
Press
I
to start. The cleaning time elapses on the
display. If the switch-off time has been shifted, the
time up to the start of pyrolytic self-cleaning
elapses in the display. The lamp in the oven interior
stays off.
A signal sounds after 3 hours. A message appears in
the display. Once the appliance has cooled down, wipe
the remaining ash out of the interior with a moist cloth.
Note:
For your safety, the oven door is locked. When
cooling down, the door lock is released when the
temperature drops below 200°C.
Cleaning accessories with pyrolytic
self-cleaning
Gaggenau baking trays and grill trays are coated with
pyrolysis-proof enamel. To arrive at an optimum cleaning
result, you are nevertheless advised to remove all
accessories from the oven before the pyrolytic cleaning
process. Only this will ensure optimum heat distribution.
If you would like to remove burnt-in residues from your
baking tray or your grill tray with pyrolytic self-cleaning,
it is imperative that you observe the following notes:
Notes
–
Remove extreme soiling, roast juice and food
remainders before pyrolytic self-cleaning. Food
remainders, grease or roast juice can catch fire
during pyrolytic self-cleaning.
–
Only ever insert one baking tray or one grill tray in
the lowest shelf in the oven.
–
Insert the baking tray or the grill tray fully.
–
The wire rack, rotisserie spit, cast roaster, baking
stone, core temperature probe or other accessories
must not be cleaned by pyrolytic self-cleaning.
3\URO\WLFVHOIFOHDQLQJ
_