Basic operation
en
13
Setting the date format
Requirement:
The display shows the possible formats
D.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.
1.
Use the rotary selector to set the required format.
2.
Press to confirm.
Setting the date
Requirement:
The display shows the preset date. The
daily setting is already active.
1.
Use the rotary selector to set the required day.
2.
Press to switch to the month setting.
3.
Use the rotary selector to set the month.
4.
Press to switch to the year setting.
5.
Turn the rotary selector to set the year.
6.
Press to confirm.
Setting the temperature unit
Requirement:
The display shows the possible units °C
and °F. The unit °C is preset.
1.
Turn the rotary selector to set the required unit.
2.
Press to confirm.
Ending the initial use
Requirement:
The display shows "Initial set-up com-
plete".
▶
Press .
a
The appliance switches to standby mode.
a
The display shows the standby screen.
a
The appliance is ready to use.
Heating up the appliance
1.
Ensure that there is no leftover packaging in the
cooking compartment.
2.
To eliminate the new-appliance smell, heat up the
empty appliance for an hour at 200 °C in the Hot air
type of heating with the door closed.
Cleaning accessories
▶
Before first use, clean the accessories thoroughly
using hot soapy water and a soft cloth.
7 Basic operation
7.1 Activating the appliance
1.
To exit standby mode, open the door and turn the
function selector or touch a touch field.
2.
Set the required function.
7.2 Switching on the appliance
1.
Use the function selector to set the required type of
heating.
a
The display shows the selected type of heating and
the suggested temperature.
2.
If required, use the rotary selector to set the desired
temperature.
a
The display shows the heating symbol
.
a
The bar displays the current heating status.
a
Once the appliance reaches the set temperature, a
signal tone sounds and the heating symbol goes
out
.
Note:
If the temperature is set to less than 70 °C, the
cooking compartment light will remain switched off.
7.3 Switching off the appliance
▶
Turn the function selector to .
7.4 Switching on the appliance after
automatic switch-off
Requirement:
After prolonged operation, the
"Automatic switch-off", Page 11
switches off the ap-
pliance.
1.
Turn the function selector to .
2.
Switch the appliance back on again.
8 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
8.1 Overview of the timer functions
Use to select the different timer functions.
Timer function
Use
Short-term timer
Cooking time
1
Cooking time end
1
Stopwatch
1
Not available in standby mode.
8.2 Calling up the timer menu
Note:
You can call up the timer menu from any operat-
ing mode. The timer menu is not available if you turn
the function selector to in the basic settings.
▶
Press .
a
The display shows the timer menu.
8.3 Exiting the timer menu
▶
Press .
a
The timer menu is closed.
a
Any settings that are not saved are lost.
Note:
You can exit the timer menu at any time.
Summary of Contents for EB333111
Page 1: ...en User manual and installation instructions EB333111 Oven Gaggenau...
Page 54: ......
Page 55: ......
