en
Home Connect
22
3.
Once you have turned the food, check that the core
temperature probe is correctly positioned in the
food.
15.5 Setting the core temperature probe
ATTENTION!
The heat of the grill heating element may damage the
core temperature probe.
▶
Ensure that the distance between the grill heating
element and the core temperature probe and the
cable of the core temperature probe is a few centi-
metres. In doing so, ensure that the meat can ex-
pand during the cooking process.
You may damage the cable of the core temperature
probe with the appliance door.
▶
Do not trap the cable of the core temperature probe
in the appliance door.
1.
Slide the food into the cooking compartment with
the core temperature probe inserted.
2.
Insert the core temperature probe into the socket in
the cooking compartment.
3.
Close the appliance door.
4.
Turn the function selector to the required type of
heating.
5.
Use the rotary selector to set the cooking compart-
ment temperature.
6.
Press
.
7.
Use the rotary selector to set the desired core tem-
perature and press
to confirm.
‒
Ensure that the set core temperature is higher
than the current core temperature.
You can change the set core temperature at any
time.
a
The appliance heats up using the set type of heat-
ing.
a
The display shows the current core temperature
and, beneath it, the set core temperature.
a
Once the food reaches the core temperature that
has been set, a signal tone sounds.
a
The appliance ends the cooking process automatic-
ally.
8.
Press to confirm.
9.
Turn the function selector to .
Changing the set core temperature
1.
Press
.
2.
Use the rotary selector to change the set core tem-
perature for the food and press
to confirm.
Deleting the set core temperature
1.
Press
.
2.
Use to delete the set core temperature.
a
The appliance continues heating in normal cooking
operation.
16 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
¡
If you want to operate the appliance via the
Home Connect app, you must activate the remote
control function in the Home Connect settings first.
This function is for your own safety. Turn the func-
tion selector on the appliance to the light position
to enable the remote control function.
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
16.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡
The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.
Summary of Contents for EB333111
Page 1: ...en User manual and installation instructions EB333111 Oven Gaggenau...
Page 54: ......
Page 55: ......
