22
6.
Removing positioning aids
Unscrew the positioning aids from the appliance door.
Note:
The positioning aids will still be needed in the course of
mounting.
7.
Fastening the adjusting rib to the
furniture door
(refrigerator compartment)
1. Measure distance
A
between the adjusting rail and
the furniture parts above.
2. Loosen the two nuts (a) and remove the adjusting
rib (b).
3. Mark this value
A
on the rear side of the furniture
door.
4. Determine the middle of the door and label it.
5. Rest the adjusting rib on the furniture door and align
to the markings. Mark the drill holes.
6. Pre-drill the holes.
7. Tightly screw the adjusting rib.
Note:
–
Attach the adjusting rib with at least 10 screws on
the furniture door. One screw should be screwed in
under the threaded rod in each case.
–
The adjusting rib has a various holes for different
furniture door design variations. Always carry out
screwing jobs on the most stable part of the furniture
door.
