10
Switching the appliance on
Switch on the appliance with the On/Off button
ÿ
.
The appliance begins to cool. Light is switched on
when the door is open.
The factory has recommended the following
temperatures:
▯
Refrigerator compar tment : +4 °C
▯
Freezer compar tment : –18 °C
Operating tips
The appliance features a rail which is fitted to the left
door.
The door of the refrigerator compar tment can be
opened without having to first open the right door.
A heating element is integrated into the bar in order
to avoid condensation. This can be switched on
and off (see chapter “Special functions”, section
“Door rail heater”).
ã
Caution
To prevent damage to the appliance or the furniture
fronts, fold the rail when closing the door.
Set the language
The display languages can be changed according
to the table in the chapter “Special functions”, “Setup
mode”.
In order to change the display language:
1.
Press setup button
μ
.
2.
Press the
¾
or
¿
setting button, until the set
language is displayed.
3.
Press the
@
or
A
setting button, until the desired
language is displayed.
4.
Press the setup button
μ
, in order to store
the settings. The set temperature is displayed
again in the fascia.
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1.
Press setup button
μ
.
The first menu (temperature unit) is displayed.
2.
Press the
@
or
A
setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3.
Press the setup button
μ
, in order to store
the settings.
The set temperature is displayed again in
the fascia.
Setting the temperature
Refrigerator compartment
(can be selected from +2 °C to +8 °C)
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
1.
Activate the setup mode with the selection
button
¿
. The symbol
¹
is displayed.
2.
Set the temperature with the
@
(warmer) or
A
(cooler) selection buttons.
Freezer compartment
(can be selected from -16 °C to -24 °C)
We recommend a setting of -18 °C.
1.
Activate the setup mode with the selection
button
¾
.
2.
Set the desired temperature with the
@
(warmer)
or
A
(cooler) setting buttons.
