12
Holiday mode
If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
holiday mode.
When Vacation mode is switched on, the following
settings are made:
▯
The appliance works in energy saving mode
▯
The illumination is switched off
▯
Fast cooling or fast freezing is then ended (if
activated)
Switching on
Press Holiday button
¶
.
VACATION
is displayed in the display panel.
Switching off
Press Holiday button
¶
.
The previous settings and temperature values are
once again activated.
Rest mode
When Rest mode is switched on, the following
settings are switched off:
▯
Ice maker
▯
Acoustic signal
▯
Interior light
▯
Messages on the display panel
▯
The background illumination of the display panel
is reduced
▯
Buttons are locked
Switching on
1.
Press the fast cooling button
´
and keep it held
down.
2.
Press Holiday button
¶
.
3.
Hold the fast cooling button
´
down for
3 seconds longer.
The symbol
VACATION
flashes on the display
panel and RESTMODE is displayed.
Switching off
Press Holiday button
¶
.
The previous settings and temperature values are
once again activated.
Energy saving mode
If the energy saving function (eco function) is
activated, the appliance switches to energy saving
operation. This energy saving function is preset at
the factory in order to reduce energy consumption.
The background illumination of the fascia is likewise
reduced.
Switching on
1.
Press setup button
μ
.
2.
Press the selection button
¿
, until
ECO MODE
and the current setting (
OFF
) is displayed.
3.
Press the setting button
@
, in order to reset
the setting.
4.
Press the setup button
μ
, in order to store
the setting.
ECO
is displayed in the fascia.
Switching off
1.
Press setup button
μ
.
2.
Press the selection button
¿
, until
ECO MODE
and the current setting (
ON
) is displayed.
3.
Press the setting button
A
, in order to reset
the setting.
4.
Press the setup button
μ
, in order to store
the setting.
Door rail heater
(for 3-door models only)
To prevent condensation, the door rail heater can be
switched on and off as required.
Switching on
1.
Press setup button
μ
.
2.
Press the selection button
¿
, until
DRY DOOR
and the current setting (
OFF
) is displayed.
3.
Press the setting button
@
, in order to change
the setting.
4.
Press the setup button
μ
, in order to save
the setting.
Switching off
1.
Press setup button
μ
.
2.
Press the selection button
¿
, until
DRY DOOR
and the current setting (
ON
) is displayed.
3.
Press the setting button
A
, in order to change
the setting.
4.
Press the setup button
μ
, in order to save
the setting.
