16
Ice maker
The ice maker makes ice cubes.
The ice maker starts to make ice cubes as soon as
the appliance has reached the set temperature. If
the ice cube container is full, the ice maker
automatically switches off.
The ice maker can make approx. 1.2 kg ice cubes
within 24 hours.
ã
Caution
Do not place bottles or food in the cube container in
order to cool them quickly. The ice maker may block
and be damaged.
Switching on
Note
If the ice maker is used for the first time and/or a long
period of not being used, do not use the ice which is
produced in the first day for hygiene reasons. Throw
the ice cubes away and clean the container!
1.
Make sure that ice maker container is its place
and locked into position.
2.
Press ice maker button
²
.
The symbol
ICE
is lit on the display panel.
Switching off
Note
Before switching off the ice maker, it is most
important that you switch the water supply to
the appliance off for a few hours.
Press ice maker button
²
.
Water filter
ã
Warning
Do not use the appliance in places where the water
quality is risky or not sufficiently known about without
suitable disinfection, before and after filtering.
A replacement filter screen can be purchased from
customer ser vice or a specialist dealer.
ã
Caution
▯
After installing a new filter, always discard the ice
produced within the first 24 hours after switching
on the ice maker.
▯
If the ice has not been used for a prolonged
period, pour all ice cubes out of the container
and also discard the ice produced within the next
24 hours.
Installing water filter
1.
Inser t filter screen into the filter housing.
2.
Place seal in the filter housing and connect to
the tap (¾" threaded connection).
3.
Using an open-end wrench, connect water supply
hose with seal to the filter housing.
4.
Carefully turn on the tap and check that
the connection points are not leaking.
ã=
Caution
There must be no leaking water!
If required, tighten the threaded connections
to a higher torque.
