21
Operating the appliance
en-us
Switching rest mode on
1.
Press
à
button to open the main menu.
2.
Press
/
button to open the view
Rest mode duration
.
3.
Press
A
/
@
buttons to change the duration.
4.
Press
I
button to start.
The appliance switches all listed functions off.
Switching rest mode off
▯
After the selected time elapses, the appliance
switches over to normal operation.
▯
To end rest mode before expiry of the selected time,
press
&
button.
Automatic door opening
The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the door.
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to wear out or fail.
Do not close the door as long as automatic door
opening is still moved out.
If you have nevertheless closed the door, leave it
closed for 5 minutes. Automatic door opening will
re-adjust itself.
Open the menu item Automatic door opening of
refrigerator compartment:
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the
Basic settings
menu.
3.
Press
™
button to open the menu.
4.
Press
C
button to move to the menu item
Automatic
door opening
j
.
5.
To change the setting, press
%
button.
Open menu item Automatic door opening of freezer
compartment:
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the
Basic settings
menu.
3.
Press
™
button.
4.
Press
C
button to move to the menu item
Automatic
door opening
k
.
5.
To change the setting, press
%
button.
Switching on Push-to-open system
In an installation situation without handles you can select
the Push-to-open system. Your appliance will then open a
crack if you press lightly on the door.
Note:
Please note that automatic door opening is
disabled if Rest mode is activated.
1.
Open menu item
Automatic door opening
of the
refrigerator or the freezer compartment.
2.
Select menu item
Push-to-open system
.
3.
Press
™
button.
4.
Select menu item
Opening force
. Here you can select
the level of force required to activate automatic door
opening.
5.
Select menu item
Opening duration
. Here you can
select how long the door should remain open a crack
before it closes again automatically.
Note:
If the door only remains open a crack, the
appliance checks once a second whether the door is
still ajar.After the selected opening duration elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can select the
Pull-to-open system. Your appliance will support you in
opening the door as soon as you pull on the handle.
1.
Open menu item
Automatic door opening
of the
refrigerator or the freezer compartment.
2.
Select menu item
Pull-to-open system
.
3.
Press
™
button.
4.
Select menu item
Opening force
. Here you can select
the level of force required to activate automatic door
opening.
Switching off automatic door opening
1.
Open the menu item
Automatic door opening
.
2.
Select menu item
Off
.
3.
Press
™
button.
