13
Dimensions of the special accessories
door fronts/door front frames
2029
2029
149
75
451
451
554
554
554
554
55
55
257
The cabinetry, the height of the base board, the
overall height of the kitchen and other determining
dimensions of the kitchen must be taken into ac-
count, in order to plan the exact positioning of the
cabinet door so that the appliance integrates per-
fectly into the overall picture of the kitchen.
The following diagrams show the basic dimensions
of the special accessories door fronts/door front
frames for various appliances.
The dimensions of the doors shown are designed
for the following basic specifications:
– Height of the base board:
102 mm
– Overall height of the installation niche:
2134 mm
– Gap:
3 mm
– Panel thickness:
19 mm
These specifications provide you with a good start-
ing point for a variety of kitchen designs.
When designing a customised cabinet door, please
ensure that the back of the cabinet door is visible
to a height of 205 mm over the floor when opening
the appliance door and adapt to the front design.
Appliance width 45.7 cm
Maximum permitted door front weight
(for each door front)
2029
603
2029
603
2029
603
230,5
368
554
554
554
554
554
554
149
75
55
55
55
257
Appliance width 61 cm
2029
756
554
554
55
Appliance width 76.2 cm
554
554
1304
722
787
908
1304
722
787
908
554
554
554
554
451
451
55
55
55
55
Appliance width 91.4 cm
Important!
The following diagrams are not a substitute
for detailed designs. Compliance with
specified requirements relating to kitchen
design is essential.
A: The cut out for the ice and water dispenser is centred
horizontally and vertically.
B: The width of the side frame parts of the door for the
Vario wine storage cabinet can be between 65 and
82 mm. A width of 75 mm is recommended.
RB 491
RY 491
A
B
B
Appliance width
45.7 cm
17 kg
61.0 cm
23 kg
76.2 cm
29 kg
91.4 cm
Cooling zone with one door (RB 491) 25 kg
Cooling zone with two doors (RY 491) 25 kg
Freezer compartment drawer (RB/RY 491) 10 kg
