15
Planning principle for a side-by -side solution
Crown
Cabinet front
Plinth
Worktop
Floor
Wall
Installation niche
Cabinet
min. 100
2134
610
Crown
Cabinet front
Ver tical cut
Installation niche
Installation niche for a side-by -side solution
– 61.0 cm cooling appliance (right)
– 45.7 cm freezer (left)
In this example, the installation niche is formed by
a tall cupboard (left) and a stable plinth (right) to-
gether with an appropriate crown for the niche.
The cabinet door for both appliances comes in an
identical design to the other kitchen fronts.
Requirements for the installation niche:
– The side walls of the installation niche must be
completely even and flat along their entire depth
– Crown is at least 100 mm deep and made of a
solid material (min. 16 mm thick)
– Width of the installation niche:
– 610 mm + 457 mm = 1067 mm
– Depth of the installation niche: 610 mm
457
610
1067
610
Stable plinth
Wall cabinet
Worktop
Cabinet front
The side walls of the installation niche must
be completely even and flat along their entire
depth.
Horizontal cut
Installation niche