10
Installation
Installation location
A dry, well ventilated room is suitable as an installation
location. The installation location should neither be
exposed to direct sunlight nor near a heat source,
e.g. a cooker, radiator, etc. If installation next to a heat
source is unavoidable, use a suitable insulating plate or
observe the following minimum distances to a heat source:
z
3 cm to an electric cooker.
z
30 cm to an oil or solid-fuel cooker.
The floor on which the appliance is to be installed must be
rigid. If required, reinforce the floor. To ensure that the ice
maker functions correctly, the appliance must be upright.
Observe ambient temperature and
ventilation
The climatic class can be found on the rating plate. It states
the room temperature within which the appliance can be
operated.
Ventilation
Never cover the ventilation openings in the base panel.
The cooling motor otherwise has to increase its output,
and this increases the electricity consumption.
Fixing
For secure installation, the appliance screwed to
neighbouring kitchen furniture and/or units.
It is very important therefore that all bordering furniture
and/or units are fixed securely to the floor and/or walls.
If making structural changes fix the appliance in place
again corresponding to the the installation instructions.
Installation surface
A load-bearing base is necessary because of the heavy
weight of the fully laden appliance.
The weight of the appliance when fully loaded:
z
Refrigerator 24"
400 kg
z
Refrigerator 30"
500 kg
In case of doubt, consult an architect or structural
engineer.
Installing and connecting the appliance
m
Caution!
The appliance should only be installed and connected
by a recognised installation engineer according to the
installation instructions belonging to the appliance.
After installing the appliance, wait at least ½ hour before
switching on the appliance. During transportation the oil in
the compressor may have flowed into the refrigeration
system.
Before switching on the appliance for the first time, clean
the interior of the appliance (see “Cleaning the appliance”,
page 19).
Climatic class
Permitted ambient
temperature
SN
+10
°
C to 32
°
C
N
+16
°
C to 32
°
C
ST
+16
°
C to 38
°
C
T
+16
°
C to 43
°
C
Summary of Contents for RC 462 200AU
