11
Electrical connection
Do not use extension cables or distributors.
The plug to secure the appliance must be freely
accessible. Connect the appliance to a 220
–
240 V / 50 Hz
ac current via a plug which has been properly installed.
The socket must be fused with a 10 to 16 A fuse.
For appliances operated in non-European countries,
the identification plate should be checked whether the
electric supply and the current model stated match the
vales of the mains supply. The rating plate is situated
in the bottom left-hand side of the appliance.
The power cord may be replaced by a technician only.
m
Warning
Never connect the appliance to electronic energy
saver plugs or to power inverters which convert the
direct current to 230 V alternating current (e.g. solar
equipment, power supplies on ships).
Factory settings
Upon leaving the factory, the appliance has been supplied
with the following settings:
–
Fascia language:
English
–
Temperature unit:
°C
–
Refrigerator compartment temperature:
+4 °C
Note
The factory settings (language, temperature unit) can be
changed in the setup mode.
Switching on the appliance
z
Press the on/off button
O
.
The appliance starts to cool down when switched on
for the first time. When the door is opened, the interior
light comes on.
Note
The preset temperatures (factory settings) are reached
after several hours.
Do not put any food in the appliance beforehand!
To change the set temperatures – see “Setting the
temperature” (page 12).
Summary of Contents for RC 462 200AU
