29
z
Fasten the base panelling.
Note:
If necessary, the base strip can also be screwed to the base
panelling. Pre-drilled screw holes are located in the base
panelling in the area of the Velcro strip.
18.
Switching the appliance on
The appliance should now be switched on for the first time
in order to ensure that the following installation stages can
be carried out accurately and that the kitchen units have
the correct appearence.
z
Open the appliance door.
z
Actuate the appliance’s on/off button.
Only for appliances with a water connection:
To avoid the risk of damage from water leaking out
if the water pipe has been damaged, keep the shut-off
tap closed.
19.
Preparing the furniture doors
Important note:
When working on the furniture doors, care should be taken
to the following:
–
Always carry out screwing jobs on the most stable
part of the furniture door. Never screw into fillings
or similar areas.
–
Always selects screws with a length smaller than
the thickness of the cabinet front.
–
Protect the surfaces of the furniture doors during
installation against damage.
The overall weight of the furniture door including the handle
should not exceed the following values:
*
Wine storage cabinet
Aligning the furniture door
The furniture doors are attached to the appliance with
the fastening elements located on the appliance.
By using these fastening elements, the furniture door
can be adjusted accurately and securely attached
to the appliance.
Function of the various parts:
1.
Threaded rod on the adjusting rib:
for adjusting the furniture door vertically.
2.
Fixing bracket:
for adjusting the cabinet frontage in terms of depth.
3.
Nuts on the threaded rod:
for securing the cabinet front in order to prevent
lateral sliding.
4.
Lower fixing bracket:
for securing the cabinet front in order to prevent lateral
sliding.
Appliance
width
Overall width of the furniture
door
45.1 cm
20 kg (8,5 kg *)
60.3 cm
25 kg (14.5 kg *)
75.6 cm
29 kg
