14
en-us
Operating the appliance
Fast cooling
Fast cooling cools the refrigerator compartment as cold
as possible.
Switch on fast cooling, e.g.:
▯
Before placing large quantities of food into the
compartment
▯
For cooling drinks quickly
Note:
When fast cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to normal
operation.
Switching on fast cooling:
1.
To open the menu for setting the temperature, press
À
button.
2.
Press
Û
button.
When fast cooling is switched on, the symbol
Û
appears on the display.
3.
The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Switching off fast cooling:
1.
To open the menu for setting the temperature, press
À
button.
2.
Press
ã
button.
When fast cooling is switched off, the symbol
Û
disappears from the display.
3.
The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
▯
Refrigerator compartment: +43° F (6° C)
▯
Cool-fresh container: +34° F (1° C)
Switching Eco mode on or off
1.
Press
à
button to open the main menu.
2.
Press
C
button to move to the menu item
Eco mode
.
3.
Press
I
/
&
button.
The temperature is changed, and the display shows the
new temperature. When Eco mode is switched off, the
recommended temperature is set.
Note:
You can also switch Eco mode on or off by
adjusting the temperature with
A
/
@
buttons.
Self-test
This function can be used to start fault analysis on your
appliance.
"Appliance self-test" on page 26
Setting the brightness of the control
panel
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
%
button to open the menu item
Brightness
.
5.
Press
B
C
buttons to set the required brightness.
6.
Press
™
button.
The setting is saved.
7.
Press
'
button to exit the menu.
Setting the display screen
You can choose between the settings
Reduced
and
Standard
. With the setting
Reduced
only the temperature
and active special functions are displayed on the control
panel after a short period without operation. If the touch
fields are touched, all keys will be visible again.
With the setting
Standard
all keys always remain visible.
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
C
button to move to the menu item
Display
screen
.
5.
Press
%
button.
6.
Press
B
C
buttons to move to the required setting.
7.
Press
™
button.
The setting is saved.
8.
Press
'
button to exit the menu.
