Preventing material damage
en
9
2 Preventing material
damage
ATTENTION!
Using the base, runners or appliance
doors as a seat surface or climbing
surface may damage the appliance.
▶
Do not stand or support yourself
on the base, runners or doors.
Contamination with oil or fat may
cause plastic parts and door seals to
become porous.
▶
Keep plastic parts and door seals
free of oil and grease.
3 Environmental protec-
tion and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
3.2 Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
¡
Keep the appliance out of direct
sunlight.
¡
Install the appliance as far away as
possible from heating elements,
cookers and other heat sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 300 mm clearance to
oil or solid-fuel cookers.
¡
Use a niche depth of 560 mm.
¡
Never cover or block the external
ventilation openings.
Saving energy during use
Note:
The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
¡
Open the appliance only briefly
and then close it carefully.
¡
Never cover or block the interior
ventilation openings or the exterior
ventilation openings.
¡
Transport purchased food in a
cool bag and place in the appli-
ance quickly.
¡
Allow warm food and drinks to
cool down before storing them.
¡
Always leave some space between
the food and to the back panel.
4 Installation and con-
nection
4.1 Scope of delivery
After unpacking all parts, check for
any transport damage and for com-
pleteness of delivery.
If you have any complaints, contact
your dealer or our after-sales service
→
The delivery consists of the following:
¡
Built-in appliance
¡
Equipment and accessories
1
¡
Installation material
¡
Installation instructions
¡
User manual
¡
Customer service directory
1
Depending on the appliance specifications
