23
11.
Sliding the appliance into the installation niche
m
Warning
Be careful when sliding the appliance into the
installation niche. Do not damage the water
connection or power cord.
Note:
If the floor or appliance is skew in relation to the installation
niche, the height-adjustable wheels should be
correspondingly adjusted before sliding the appliance into
the niche.
Plug the mains plug into the socket.
Note:
A separate plug is necessary for each appliance in the
case of Side-by-Side set up!
Protect the mains lead from getting wedged under or
behind the appliance.
Recommended procedure:
Tie a piece of string in the middle of the power cord
and guide the string forwards over the appliance.
When pushing the appliance into the cavity, pull the
cable upwards with the string.
Insert water connection line into the protective pipe on
the rear of the appliance.
m
Warning:
The appliance may tilt when the water connection line
is inserted into the protective pipe (a)!
Slide the appliance carefully into the niche until
the height-adjustable wheels grip into the anti-tilt
mechanism.
Remove the edge protector of the installation niche.
