32
22.
Hanging and aligning the furniture door
The height of the cabinet frontage is set using the threaded
rods.
Hang the furniture door on the threaded rods.
Adjust the furniture door using the threaded rods
(Torx screwdriver).
Transfer the middle drilled holes on the outside
edge of the appliance door to the furniture door
and mark them.
Remove furniture door.
On both lengths of the furniture door, draw a parallel
line with the help of the positioning aid.
Lengthen the drill hole markings to the parallel lines
using a try square.
Position fixing rail and mark holes.
Pre-drill the holes.
Screw on the fixing ribs.
