35
25.
Fastening the finger protector
When positioning the finger protector at the door,
ensure that the fixing holes in the cover strip
correspond with the boreholes in the fixing brackets.
Mark now the bottom edge of the finger protector and
shorten accordingly.
Push the finger protector on the hinge side into the
gap between the appliance and cavity wall (
1.
).
Press the cover strip of the finger protector into the
gap between the furniture door and the appliance
door from top to bottom (
2.
). Ensure that the fixing
holes in the cover strip correspond with the boreholes
in the fixing brackets (
3.
)!
Attach the finger protector with screws to the fixing
brackets (
3.
).
Test functioning and smooth running of the finger
protector by repeatedly opening and closing the door.
26.
Attaching the covers
Attach the cover ribs on both longitudinal sides
of the door.
Attach the light switch cover.
The light switch cover for the 61 cm and 76 cm width
can be screwed to the door.
