5
Installation possibilities
Various installation possibilities are available.
These are only limited by the kitchen design and the finger
protector function.
Stand alone appliance
Side-by-Side set up
* it is necessary to have a dividing wall!
If two appliances are set up next to each other, a sealing
kit for Side-by-Side combination should be used in order
to guarantee a stable connection.
Further information concerning this can be found in the
section “Tools and accessories which are needed”.
Stand alone appliance with dividing wall
Note:
–
When measuring the dividing wall for model 4,
pay attention to the thickness of the furniture front
to be mounted in order to avoid damage when
opening doors at the same time.
–
If the distance between the appliances is less than
160 mm, the heating kit for the Side-by-Side
combination should be used.
Further information concerning this can be found
in the section “Tools and accessories which are
needed”.
–
The minimum thickness of the dividing walls is 16 mm.
As an end section to a row of kitchen
units
If a side of the appliance is visible, use a side covering.
The side covering must be connected firmly to the wall,
the floor and the upper cupboards before the appliance
is slid into the installation niche.
The dimensions of the side covering are governed
by the opposing niche wall. During installation, make
sure that the installation niche has right angles and has
the exact size necessary for the appliance.
